7:36 p.m.
Frederic,
Here is the tech rider for the launch.
Let us know if anything needs clarification.
* beamer
* HDMI cable from laptop (in little table) to beamer
* audio mixer (connected to PA)
* 2 mics + 2 stands
* laptop (mini-jack) to mixer cable
* large table(S) for displaying reader/output, scanner (it would be nice
if this was a low, so if the audience sits in the carpted floor their
heads are not lower than the table)
* couch
* little table
* carpets
* a lot of power outlets (for scanner and laptops, etc)
* scanner
** keyboard
** screen (with HMDI in. Can be the large one that is in PB )
5:28 p.m.
Hi, Andre
Thanks for the tech info
Looks all clear, we’ll put it in production tomorrow
Wishing you a good evening,
Frederic
Frédéric Van de Velde
Side programs & activities (Media & Design) + Archive Operations + Volunteer
Coördinator
+31 (0)6 14 26 83 64
WORM Pirate Bay <http://thepiratebay.worm.org/> (Part of WORM Institute for
Avant-garde Recreation)
Boomgaardsstraat 71-73
3012 XA, Rotterdam
The Netherlands
On 19 Mar 2018, at 20:36, andre castro <andre(a)andrecastro.info>
wrote:
Frederic,
Here is the tech rider for the launch.
Let us know if anything needs clarification.
* beamer
* HDMI cable from laptop (in little table) to beamer
* audio mixer (connected to PA)
* 2 mics + 2 stands
* laptop (mini-jack) to mixer cable
* large table(S) for displaying reader/output, scanner (it would be nice
if this was a low, so if the audience sits in the carpted floor their
heads are not lower than the table)
* couch
* little table
* carpets
* a lot of power outlets (for scanner and laptops, etc)
* scanner
** keyboard
** screen (with HMDI in. Can be the large one that is in PB )
9:48 a.m.
Hello Andre,
did you as also for a speaker? I am going to need one set.
Just to make it clear: are we all going to use one laptop for people to try
our scripts? This means that we should all install our dependencies to it.
Angeliki
On 19 March 2018 at 20:36, andre castro <andre(a)andrecastro.info> wrote:
Frederic,
Here is the tech rider for the launch.
Let us know if anything needs clarification.
* beamer
* HDMI cable from laptop (in little table) to beamer
* audio mixer (connected to PA)
* 2 mics + 2 stands
* laptop (mini-jack) to mixer cable
* large table(S) for displaying reader/output, scanner (it would be nice
if this was a low, so if the audience sits in the carpted floor their
heads are not lower than the table)
* couch
* little table
* carpets
* a lot of power outlets (for scanner and laptops, etc)
* scanner
** keyboard
** screen (with HMDI in. Can be the large one that is in PB )
_______________________________________________
XPUB mailing list -- xpub(a)we.lurk.org
To unsubscribe send an email to xpub-leave(a)we.lurk.org
--
*~A~*
10:01 a.m.
Angeliki,
On 03/22/2018 10:48 AM, Angeliki Diakrousi wrote:
Hello Andre,
did you as also for a speaker? I am going to need one set.
The speakers are part of
the PA(public address system). So yes.
Just to make it clear: are we all going to use one laptop for people to try
our scripts? This means that we should all install our dependencies to it.
That is
up to you. But we can discuss this in more detail tomorrow at
12. Can you join us, Angeliki (locally or remotely)?
a
Angeliki
On 19 March 2018 at 20:36, andre castro <andre(a)andrecastro.info> wrote:
> Frederic,
> Here is the tech rider for the launch.
> Let us know if anything needs clarification.
>
> * beamer
> * HDMI cable from laptop (in little table) to beamer
> * audio mixer (connected to PA)
> * 2 mics + 2 stands
> * laptop (mini-jack) to mixer cable
> * large table(S) for displaying reader/output, scanner (it would be nice
> if this was a low, so if the audience sits in the carpted floor their
> heads are not lower than the table)
> * couch
> * little table
> * carpets
> * a lot of power outlets (for scanner and laptops, etc)
> * scanner
> ** keyboard
> ** screen (with HMDI in. Can be the large one that is in PB )
> _______________________________________________
> XPUB mailing list -- xpub(a)we.lurk.org
> To unsubscribe send an email to xpub-leave(a)we.lurk.org
>
--
oooooooooo.io
bibliotecha.info
11:51 a.m.
Yes I will be there!
Angeliki
On 22 March 2018 at 11:01, andre castro <andre(a)andrecastro.info> wrote:
Angeliki,
On 03/22/2018 10:48 AM, Angeliki Diakrousi wrote:
> Hello Andre,
> did you as also for a speaker? I am going to need one set.
The speakers are part of the PA(public address system). So yes.
>
> Just to make it clear: are we all going to use one laptop for people to
try
> our scripts? This means that we should all install our dependencies to
it.
That is up to you. But we can discuss this in more detail tomorrow at
12. Can you join us, Angeliki (locally or remotely)?
a
>
> Angeliki
>
> On 19 March 2018 at 20:36, andre castro <andre(a)andrecastro.info> wrote:
>
>> Frederic,
>> Here is the tech rider for the launch.
>> Let us know if anything needs clarification.
>>
>> * beamer
>> * HDMI cable from laptop (in little table) to beamer
>> * audio mixer (connected to PA)
>> * 2 mics + 2 stands
>> * laptop (mini-jack) to mixer cable
>> * large table(S) for displaying reader/output, scanner (it would be nice
>> if this was a low, so if the audience sits in the carpted floor their
>> heads are not lower than the table)
>> * couch
>> * little table
>> * carpets
>> * a lot of power outlets (for scanner and laptops, etc)
>> * scanner
>> ** keyboard
>> ** screen (with HMDI in. Can be the large one that is in PB )
>> _______________________________________________
>> XPUB mailing list -- xpub(a)we.lurk.org
>> To unsubscribe send an email to xpub-leave(a)we.lurk.org
>>
>
>
>
--
oooooooooo.io
bibliotecha.info
--
*~A~*
945
days inactive
948
days old
4 comments
3 participants
participants (3)
-
andre castro -
Angeliki Diakrousi -
Frederic Van de Velde